Customized & Corrective
Medical Grade Custom Orthotics
Get Your Custom FitA true custom orthotic you mold yourself in 15 minutes. Built on proven orthotics principles with modern technology.
A true custom orthotic you mold yourself in 15 minutes. Built on proven orthotics principles with modern technology.
Customized & Corrective
Medical Grade Custom Orthotics
Customers and clinicians often ask whether a moldable orthotic simply captures the existing deformity.
It does not.
Contour Custom Pro was engineered to combine the patient's anatomy with an engineered support structure: providing both customization and correction.
How it Works
How it's Constructed
The middle layer molds to your foot. The bottom layer decides where it stops.
01
Comfort Top Layer
Soft enough to wear all day, ventilated so your feet stay dry. Takes the edge off the shell underneath without softening the support
02
Moldable Fiberglass Compound Core
Water makes this layer moldable for about fifteen minutes. Then it hardens, and the shape it hardens into is permanent.
03
Engineered Arch Support Base
The corrective layer that maintains pressure against your arch to make sure it's molded in a correct position.
How it Molds & Corrects
The middle layer molds to your foot. The bottom layer decides where it stops.
Your Foot Pushes Down
The Arch Base Pushes Up and Corrects
The Core MoldsWith Corrective Pressure From the Base
Your foot presses down. The base presses up with corrective pressure. The core molds where those two pressures meet, so the shape is set by both of them rather than by your foot alone.
01
Comfort Top Layer
Soft enough to wear all day, ventilated so your feet stay dry. Takes the edge off the shell underneath without softening the support
02
Moldable Fiberglass Compound Core
Water makes this layer moldable for about fifteen minutes. Then it hardens, and the shape it hardens into is permanent.
03
Engineered Arch Support Base
The corrective layer that maintains pressure against your arch to make sure it's molded in a correct position.
How it's Constructed
The middle layer molds to your foot. The bottom layer decides where it stops.
Your Foot Pushes Down
The Arch Base Pushes Up and Corrects
The Core Molds to Your Contour With Corrective Pressure From the Base
Your foot presses down. The base presses up with corrective pressure. The core molds where those two pressures meet, so the shape is set by both of them rather than by your foot alone.
True Custom Orthotics.
Molded to You.
How it Molds & Corrects
The middle layer molds to your foot. The bottom layer decides where it stops.
23% More Arch Support
A greater share of load carried through the arch during gait. This is what arch support looks like when it is actually engaging.
8% Less Heel Pressure
Load moved off the heel and forward. Lower peak pressure at the heel is associated with less strain through the plantar fascia.
11% Less Side Sway
Center of pressure is where load concentrates as you roll through a step. Less side-to-side wander means a more stable gait.
Watch How it Works
A Clinical-Grade Custom Fit Within 15 minutes
Inject Water
Walk to Mold
Relax and Set
Layer 1: Comfort Top Layer
Skin-safe thermoplastic elastomer with micro-ventilation. Wicks moisture, resists odor, and softens step-in feel so clients actually wear the orthotic every day.
Layer 2: Moldable Fiberglass Compound Core
Softens on activation (water injection), molds to the foot during the 12-minute cure, then sets permanently into a semi-rigid custom shape. This is what makes Contour a custom orthotic rather than an insole.
Layer 3: Engineered Arch Support Base
The correction layer. A high-density EVA base with a pre-shaped medial arch ridge. During the cure, this ridge supplies continuous upward pressure through the midfoot, guiding the composite into corrective alignment.
100% Risk Free Guarantee
Measured Outcomes
A controlled crossover study conducted by the University of Tokyo comparing this technology against flat insoles and against laboratory-fabricated custom orthotics, using 3D motion capture and in-shoe pressure mapping.
23% More Arch Support
A greater share of load carried through the arch during gait. This is what arch support looks like when it is actually engaging.
8% Less Heel Pressure
Load moved off the heel and forward. Lower peak pressure at the heel is associated with less strain through the plantar fascia.
11% Less Side Sway
Center of pressure is where load concentrates as you roll through a step. Less side-to-side wander means a more stable gait.
Watch the Walkthrough Video Below
Watch How it Works
Inject Water
Simply inject water into the provided insoles through the marked injection hole—no mess, no hassle.
Walk to Mold
Place the insoles into your shoes and walk comfortably for 10 minutes, allowing the insoles to precisely mold to your feet.
Relax and Set
Sit down and relax for another 5 minutes as the insoles permanently set to your exact foot shape, providing immediate comfort.
15 Minutes. A Perfect Fit.
Unlike clinic orthotics cast from a static impression, Contour shapes to your foot as you actually move—capturing your real arch, gait, and pressure points.
Schedule a 1-on-1 Fitting Call
Schedule a live 1-on-1 call with one of our team members. We'll walkthrough the process step-by-step ensuring a perfect fit.
See Available TimesClinically Proven Pain Relief
Instant Customization
Sustainable & Durable
Supports Active Lifestyles